How to Program Chevy Garage Door Opener
Whether you’re a new Chevy owner or you’ve upgraded models and want to learn how to program the Chevy Homelink garage door opener, we at Joe Basil Chevrolet have created a guide to help. If you need additional assistance, don’t hesitate to contact our service department with any questions.
Programming Your Homelink Garage Door Opener for the First Time
- Make sure your remote control transmitter has a fresh battery
- With your car parked facing your garage, switch on the ignition.
- Locate your Homelink buttons. They’ll usually be one of three places: your rearview mirror, your visor, or your overhead console.
- Holding your remote control transmitter 1-3 inches away from your Homelink control buttons, simultaneously press the desired Homelink control button and the corresponding remote control button.
- Hold the button until the Homelink indicator light flashes slowly and then either changes to a solid light or flashes rapidly.
- The change indicates that frequency signal has been learned.
- If the Homelink indicator light is solid, programming is complete. If the Homelink indicator light flashes rapidly continuously, follow the next group of steps below.
- Push the Homelink controller button twice to activate. If this does not work, follow the next group of steps.
When the Homelink indicator light flashes rapidly continuously, that means you have a rolling code system. When this happens, you’ll need to follow these additional steps for programming your garage door:
- Exit the car and enter your garage, locating the garage door opener motor.
- Find the “Learn” or “Smart” button. This is typically next to the hanging antenna wire on the back of the motor.
- Press the Learn button once, and you will have 30 seconds to complete the next step.
- Return to the vehicle, and push the programmed homelink control button three times to complete the activation process.
- Repeat the previous four steps for the remaining two Homelink buttons, and your garage door should now be activated.
- Once programmed, the Homelink wireless control system and the original remote control transmitter can each be used to operate your garage door.
Let Joe Basil Chevrolet Help
If you still need some assistance, check your owner’s manual or schedule an appointment with our service center. Our technicians are more than happy to help. While here, we can also help you learn more about the latest Chevy technology, our new models, and more. Contact Joe Basil Chevrolet today with any questions, browse our service specials, and more.